I would try other inputs and bypass jungle ic, i.e. svideo or component input.A 1080i signal bypasses allot of things. You should change capacitor c2l04 .47uf@10v off pin 29 of ic2l00 on the terminal pcb.You will notice that the pip and component inputs are not effected with your trouble. Jeff ----- Original Message ----- From: "pete" <tvtech@xxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, November 15, 2005 7:32 PM Subject: [TechAssist] mitsu projo vs60111 intermittent color v20 chassis > mitsubishi projection tv set. The unit would play ok for 15 min or so > then the green would go out leaving the tv with purple color then after > 1 min or so it would have no color and stay black and white until the > cust would turn the set off. After unit cools off then it would go back to > normal until 10 or 15 min and begin again same problem. the jungle feels > very hot when this happens this is a 100 pin flat pack. Any help will be > greatly appreciated > thanks > > Pete > > Perdomo Tv Inc Since 1972 > Miami.Fl > ----------------------------------------------------------------------------- > This Email List is accessible to the general public through search > engines. Remove: http://www.tech-assist.org/remove.htm > Set Vacation > mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation > Lost Password: http://www.tech-assist.org and select "Login Problems?". > Email Archives: //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/