[TechAssist] emerson vcr3002 fixed!
- From: "adam miller" <adamt123@xxxxxxxxxxx>
- To: techassist@xxxxxxxxxxxxx
- Date: Wed, 17 Oct 2001 14:40:10 -0400
hello,
thanks for the replies,
this unit was originally dead when i got it, found cold solder on
transformer, then had an intermittant problem with no power, there was a
hairline crack next to connector on power supply board, hidden under the
black silkscreen of the screw hole., about 4 traces were affected. you can
flex the power supply board violently to see the problem.
troy
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
Help make your TechAssist online repair tips
database better! Submit your fixes here:
http://www.circuitwork.com/techassist/tip/#tips
To unsubscribe write to:
techassist-request@xxxxxxxxxxxxx
with unsubscribe in the subject line.
Other related posts:
- » [TechAssist] emerson vcr3002 fixed!
