Have you tried mechanical alignment with crt centering magnets? Robert tvservice@xxxxxxxxxxxxx H & H Electronics Inc ----- Original Message ----- From: "Andrew Soltes" <atv2@xxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Saturday, April 17, 2004 5:16 PM Subject: [TechAssist] blue conv setup ptk169 > hello everyone > i have this monster ptk169 chassis that will only let me adjust > the blue conv within a 1/4 of an inch of my red and green cross hatch > leaving all the imadges with a blue out line i checked all plugs going to the conv board and they are in the right position i check the filters (esr) found nothing also checked transistor and voltages nothing off, on the ptv aux board lost a this point and i have a cust getting mad. maybe some knows what i've missed . thanks for any help andy > Andy's TV & VCR Service > 662 McKean Ave > Donora,Pa. 15033 > 724-379-8559 voice/fax > atv2@xxxxxxxxxxxxx > > > -------------------------------------------------------------------------- ------ > > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/