No problem Russell Robert supertek66@xxxxxxxxxxx robert_herring@xxxxxxxx H&H Electronics Inc Dallas,Tx. 75233 ----- Original Message ----- From: "Russell Hornsby" <undertaker48@xxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Saturday, July 28, 2001 10:15 PM Subject: [TechAssist] Re: Zenith TV > > Hi Robert: > Thank you for the information. > Unsoldered Clock and Data lines and TV Powered up, with Slick Raster, I > replaced the tuner(can't believe I had one, on another chassis) and the > TV is working great. > Thaks again for your help. > Russell Hornsby > Hornsby Electronics > > On Thu, 26 Jul 2001 18:05:05 -0500 "Robert Herring" > <supertek66@xxxxxxxxxxx> writes: > > > > Russell, > > unsolder clock and datta lines to tuner if comes on then replace > > tuner. > > Robert > > supertek66@xxxxxxxxxxx > > robert_herring@xxxxxxxx > > H&H Electronics Inc > > Dallas,Tx. 75233 > > ----- Original Message ----- > > From: "Russell Hornsby" <undertaker48@xxxxxxxx> > > To: <techassist@xxxxxxxxxxxxx> > > Sent: Thursday, July 26, 2001 6:34 PM > > Subject: [TechAssist] Zenith TV > > > > > > > > > > Hi All: > > > I have a 1998 Zenith TV, 25 inch, Chassis # GA-2, Model # A25A02D, > > All > > > voltages seem to be ok, but will not power up, Need Part # for > > Eprom, Its > > > IC6001, and the numbers on the Eprom is ATMEL 818 24C04. Have no > > Print > > > on this one. > > > Please help. > > > Thank You > > > Any help would be greatly appreciated. > > > Russell Hornsby > > > Hornsby Electronics > > > > > > > > > > > > Help make your TechAssist online repair tips > > > database better! Submit your fixes here: > > > http://geocities.com/circuit_work/tip/#tips > > > To unsubscribe write to: > > > techassist-request@xxxxxxxxxxxxx > > > with unsubscribe in the subject line. > > > > > Help make your TechAssist online repair tips > > database better! Submit your fixes here: > > http://geocities.com/circuit_work/tip/#tips > > To unsubscribe write to: > > techassist-request@xxxxxxxxxxxxx > > with unsubscribe in the subject line. > > > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://geocities.com/circuit_work/tip/#tips > To unsubscribe write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. > Help make your TechAssist online repair tips database better! Submit your fixes here: http://geocities.com/circuit_work/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.