[TechAssist] Re: Zenith Projo Model RZ56Z83R8/ FIXED
- From: "Armando Guerra" <birdie@xxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Sun, 10 Nov 2002 06:21:44 -0700
I forgot to mention that I did replacethe resistor in each bd.Thanks.
Mando
Birdie's TV & Electronics
Casa Granded,AZ
----- Original Message -----
From: "Jeff Farnsworth" <jlfonz@xxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Tuesday, November 09, 2004 3:37 PM
Subject: [TechAssist] Re: Zenith Projo Model RZ56Z83R8/ FIXED
> If someone didnt allready say so--I strongly recommend replacing the same
> resistors on the other crt boards or your allmost guarenteed a call back
>
> TV Doctor
> Avalon, Wi
>
>
> ----- Original Message -----
> From: "armando guerra" <birdie@xxxxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Tuesday, November 09, 2004 1:14 AM
> Subject: [TechAssist] Re: Zenith Projo Model RZ56Z83R8/ FIXED
>
>
> > This set is fixed now.The problem was on the red crt bd.R5102 had
changed
> to
> > 2meg.I went ahead and changed Q5102 (red output) for safety.Strange
thing
> was
> > that the resistor was reading 119k in ckt.Removed one end and gave me a
> true
> > reading of 2meg.Replaced both parts and did minor convergence and set is
> good to
> > go.Thanks to Bob waterman for the manual and also to all of the other
> techs that
> > helped with idea's and tips.
> > Mando
> > Birdie's TV & Electronics
> > Casa Grande, AZ
> >
> >
> > Gemini Computer & TV wrote:
> >
> > > I have uploaded the following file to the members area.
> > >
> > > 3334_PV149_GZ_3Schematics.pdf
> > >
> > > Bob Waterman, CET® #RI-28
> > > Master Technician License #9109
> > > Service Manager / Parts Manager
> > > Gemini Computer, TV, & Security Alarms
> > > (508)695-7302
> > > (508)695-7769 FAX
> > > geminitv@xxxxxxxxxxx
> > >
> > > ----- Original Message -----
> > > From: "armando guerra" <birdie@xxxxxxxxxxxxx>
> > > To: <techassist@xxxxxxxxxxxxx>
> > > Sent: Friday, November 05, 2004 1:41 PM
> > > Subject: [TechAssist] Zenith Projo Model RZ56Z83R8/ 9-1303 video bd
and
> > > 9-1674 smps
> > >
> > > > This set comes on but the pix is mostly red.I checked the crt's and
> they
> > > > test ok.The pix looks smeared also.I checked R5102 on the 9-1303 and
> > > > they are at 118k.The video output xsistors test ok.What else can
cause
> > > > this kind of a problem?Would the R3243 and 3244 on the 9-1674 cause
> > > > this?Any help or tips would help.Thanks
> > > > mando
> > > > Birdie's TV & Electronics
> > > > Casa Grande, AZ
> > > >
> > > >
> > >
>
> --------------------------------------------------------------------------
> > > ---
> > > > Lost Password:
> > > > http://www.tech-assist.org and select "Login Problems?".
> > > > Email Archives:
> > > > //www.freelists.org/archives/techassist/
> > > >
> > >
> >
>
> --------------------------------------------------------------------------
> ---
> > > Lost Password:
> > > http://www.tech-assist.org and select "Login Problems?".
> > > Email Archives:
> > > //www.freelists.org/archives/techassist/
> >
> >
>
> --------------------------------------------------------------------------
> ---
> > Lost Password:
> > http://www.tech-assist.org and select "Login Problems?".
> > Email Archives:
> > //www.freelists.org/archives/techassist/
> >
> >
>
>
> --------------------------------------------------------------------------
---
> Lost Password:
> http://www.tech-assist.org and select "Login Problems?".
> Email Archives:
> //www.freelists.org/archives/techassist/
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
