[TechAssist] Re: Zenith PVY4665RK 9-1674 Now Convergence Problems
- From: "Gemini Computer & TV" <geminitv@xxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Thu, 6 May 2004 08:21:46 -0400
I have posted this numerous times but if you look on the members area main
download page, you will find the following. I suggest you view these files:
Zenith Convergence S..> 11-Mar-2004 16:24 401k
Zenith Illustration.pdf 11-Mar-2004 16:26 693k
Zenith Procedure.pdf 11-Mar-2004 16:23 905k
Zenith Remote.pdf 11-Mar-2004 16:27 586k
Bob Waterman, CET® #RI-28
Master Technician License #9109
Service Manager / Parts Manager
Gemini Computer, TV, & Security Alarms
(508)695-7302
(508)695-7769 FAX
geminitv@xxxxxxxxxxx
geminitv@xxxxxxx
www.geminicomputertvsecurityalarms.com
----- Original Message -----
From: "Larry E." <videotech@xxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Wednesday, May 05, 2004 6:45 PM
Subject: [TechAssist] Re: Zenith PVY4665RK 9-1674 Now Convergence Problems
> Robert, No it doesn`t have the usual control board behind the grille it
must be
> adjusted
> via the menu, Larry E
>
> Larry Eastman
> American TV & Electronics
> Crystal River, Fl.
>
> tvservice wrote:
>
> > This model has convergence adjustment controls behind speaker grille
> > Robert
> > tvservice@xxxxxxxxxxxxx
> > H & H Electronics Inc
> > ----- Original Message -----
> > From: "Larry E." <videotech@xxxxxxxxxxxx>
> > To: "tech-assist" <techassist@xxxxxxxxxxxxx>
> > Sent: Wednesday, May 05, 2004 3:27 PM
> > Subject: [TechAssist] Zenith PVY4665RK 9-1674 Now Convergence Problems
> >
> > > Hi Guys, I have this projection set in the shop that was dead so I
> > > replaced the 9-1674 module,
> > > set now starts but picture is poor, replaced R5102 on Green crt board,
> > > picture improved some,
> > > checked the resistor on red & blue they are on the money at 120K. One
of
> > > the convergence IC`s
> > > is running hot (IC4009) so I replaced it, still runs hot, picture
> > > appears to be out of focus a little on the right upper side of the
> > > screen and my convergence is off a little on both red & blue, I don`t
> > > have the print of course, tried the 98xx enter for factory service but
> > > don`t see anything for convergence adjust, I need some help on this
> > > one, I`ve got way too much time and money
> > > in this one already and the customers getting impatient, tia, Larry E
> > >
> > > Larry Eastman
> > > American TV & Electronics
> > > Crystal River, Fl.
> > >
> > >
> >
> --------------------------------------------------------------------------
> > ---
> > > Lost Password:
> > > http://www.tech-assist.org and select "Login Problems?".
> > > Email Archives:
> > > //www.freelists.org/archives/techassist/
> >
>
> --------------------------------------------------------------------------
---
> > Lost Password:
> > http://www.tech-assist.org and select "Login Problems?".
> > Email Archives:
> > //www.freelists.org/archives/techassist/
>
>
> --------------------------------------------------------------------------
---
> Lost Password:
> http://www.tech-assist.org and select "Login Problems?".
> Email Archives:
> //www.freelists.org/archives/techassist/
>
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
