On the 9-1674 board replace R3243 (110K 1/2 w)located under the green 2 watt R3244 (82K). Replace both. After, check the 120K resistors on each of the 9-1303 CRT boards. Been there. Phil Bader al m wrote: > > I know I saw this on here before but I can't find it in my records. I have > this PTV that has just 3 bowed horizontal lines ,one of each color at the > top of the screen .(horizontal as from side to side). The 1 ohm resistors on > the convergence board are not open but they look hot. Is there any thing I > can check on this board to see if the IC's are bad. > al marquardt > ampm@xxxxxxx > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ -- Philip Bader Jan Phyl TV Inc. (estab. 1976) 3420 Recker Hwy. Winter Haven, Fl. 33880 Fax (863) 299-8821 email: philbad@xxxxxxxxxx ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/