I forgot to mention as a matter of routine to also replace R5110, R5111, and R5112 on the CRT board with 120K, 1 watt due to their high failure rate. Bob Waterman, CET® #RI-28 Master Technician License #9109 Service Manager / Parts Manager Gemini Computer, TV, & Security Alarms (508)695-7302 (508)695-7769 FAX geminitv@xxxxxxxxxxx ----- Original Message ----- From: "Gemini Computer & TV" <geminitv@xxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, December 16, 2004 7:07 AM Subject: [TechAssist] Re: Zenith Model SY3581DT/ Has sound but no pix. > --------------------------------------------------------------- > Text pasted from WinSTIPS 2.0 > http://www.ServiceSoftware.com > --------------------------------------------------------------- > > ZENITH 9-1672 > > Video - None Powers Up / Audio Ok / Increase Screen To See Gray Raster > > Walter Wood > > If No Osd Either, Then Try R3234 110k Off Flyback. Probably Have To Remove > To Test. > > --------------------------------------------------------------- > --------------------------------------------------------------- > Text pasted from WinSTIPS 2.0 > http://www.ServiceSoftware.com > --------------------------------------------------------------- > > ZENITH 9-1672-01 > > No Video Or Osd, Hv & Audio Ok > > Greg Boyd > > R3234: 110k ( Off Pin 3 Of Ihvt) > > --------------------------------------------------------------- > > Bob Waterman, CET® #RI-28 > Master Technician License #9109 > Service Manager / Parts Manager > Gemini Computer, TV, & Security Alarms > (508)695-7302 > (508)695-7769 FAX > geminitv@xxxxxxxxxxx > > > > > ----- Original Message ----- > From: "armando guerra" <birdie@xxxxxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Wednesday, December 15, 2004 12:13 PM > Subject: [TechAssist] Zenith Model SY3581DT/ Has sound but no pix. > > > > This set has high voltage and sound but no pix,dark screen.The voltage > > at the video outs is at 270v.G2 is 425v.If I bring up the screen > > control,I get a faded raster with retrace lines.Pix tube test ok.I had > > in my notes to check R3234 and 3219 but both are ok. > > Using ext jacks has the same problem.This set uses a 9-1672-01 for > > smps,9-1675-01 for signal module and the 9-1298-03 for crt bd.If anyone > > has any tips or suggestions on this problem,please advice.Thanks. > > Mando > > Birdie's TV & Electronics > > Casa Grande,AZ > > > > > > -------------------------------------------------------------------------- > --- > > Lost Password: > > http://www.tech-assist.org and select "Login Problems?". > > Email Archives: > > //www.freelists.org/archives/techassist/ > > > > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/