Ed, If its the model with the controls mounted on a small separate p/c board check solder..... has foil both sides resolder all eyelets Bob, Bobs TV Worcester, ma woodman1@xxxxxxxx Main 508-853-1482 Fax 508-853-1480 ----- Original Message ----- From: "Tel-Tek Electronics" <teltek3@xxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Friday, July 23, 2004 1:39 PM Subject: [TechAssist] Zenith 9-790-2 Panel. Model SE2593 > Anybody have any quick fixes on this set for poor contrast. > I presume CRT is not the best, but this is just a washed out picture, > Video wise. > > -Ed- > > Tel-Tek Electronics > teltek3@xxxxxxxxxxxx > Ontario-Canada > > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/