Jeff, There is a 10mf 35V cap up aprox 3/4" from IC1200 that goes between two jumpers not marked on board or on print. That will cause this problem. Hope this helps.. Bob, Bobs TV Worcester, ma woodman1@xxxxxxxx Main 508-853-1482 Fax 508-853-1480 ----- Original Message ----- From: "Shoreline Electronics" <jstielau@xxxxxxxx> To: "Tech Assist Group" <techassist@xxxxxxxxxxxxx> Sent: Friday, October 25, 2002 8:33 AM Subject: [TechAssist] Zenith 9-1132-01 Module Int Video > > > Make : Zenith > Model : SJ2726EW5 > Main Module : 9-1132-01 > > Problem : Intermittent Horizontal Tearing , May lose video all together with > the screen going completely black & MUTE being displayed. > > C2212 & C2231 & C2230 were first changed ( Common culprits )......then we > changed ALL the little blue caps. No help. Rebuilts are backordered so > we'd like to try and solve this one. > > Chassis is still at customers house in a big ol' console......anyone recall > any problems like this on this module? > > Jeff Stielau > Shoreline Electronics Repair > 125 Beech Tree Lane > Westbrook, CT 06498 > 860-399-1861 > 860-664-3535 (fax) > jstielau@xxxxxxxx > > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/