Maybe because they a 220K resistors not 22K Phillip R Hull phil245@xxxxxxxxxxxxx ----- Original Message ----- From: "Lyles Tv" <tech@xxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Friday, September 13, 2002 11:17 AM Subject: [TechAssist] Zen pvr4660vk Can't adjust color very good > 9-1302-07 smps > a-17196-05 focus block > 9-1541 main > I have replaced the 22k ohm resistors on the crt modules R5101/02/03 I cannot get the colors adjusted up to to as bright as they should be. I had seen alot of reference to replacing the bleeder assy. but have not needed to replace one of these yet. Is this a symptom of the bleeder going bad? or am I having a problem with the akb? TIA > Jeff Farnsworth > Lyles TV and Appliance > 17 S Washington St > Elkhorn, Wi. 53121 > ph 262-723-3477 > fax 262-723-3658 > tech@xxxxxxxxxxx > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ > ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/