[TechAssist] Re: Toshiba VCR Model# M651C FIXED

  • From: "David Lessard" <mrfixit@xxxxxxxxxxx>
  • To: <techassist@xxxxxxxxxxxxx>
  • Date: Sat, 1 Mar 2003 14:10:01 -0500

Bill,

Thanks for the upgrade information pertaining to this model. I removed the
cassette tray and checked the gears, levers, etc., and it all seems OK. I
decided to remove and give the mode switch a good cleaning, that was the
fix, now everything is back to normal. Again thanks.

David Lessard
50 Harrison Street
Alexandria Electronics
Ontario, Canada
K0C-1A0
mailto:mrfixit@xxxxxxxxxxx

-----Original Message-----
From: techassist-bounce@xxxxxxxxxxxxx
[mailto:techassist-bounce@xxxxxxxxxxxxx]On Behalf Of Premium
Technologies
Sent: Saturday, March 01, 2003 1:15 PM
To: techassist@xxxxxxxxxxxxx
Subject: [TechAssist] Re: Toshiba VCR Model# M651C



Hi David,
You might check the gears on the right side of the load carriage.  If
they're white you need the upgrade kit I don't have the p/n for that I'm at
home today.  Sounds like rack gear may be sliding over carriage drive gear
instead of engaging it and as it unloads it binds.  But also check the cam
lever, it's located underneath the large cam gear, right rear side of the
top of the chassis. It drives the arm that moves the cassette tray. The end
in the upper left-hand corner will sometimes break off and cause the
"bonkers" symptoms you described.  The cam lever, p/n# TCE224988 is
available at Studio Sound, http://www.iglou.com/studiosound/
for $8.90 along with the gear upgrade kit.
Hope this helps.
Bill

William Rayburn, CET
Premium Technologies
PO Box 442
Long Beach, WA. 98631
Phone: (360) 642-4993
Fax:      (815) 425-8530
email: premtech@xxxxxxxxxxxxxx
----- Original Message -----
From: "David Lessard" <mrfixit@xxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Saturday, March 01, 2003 9:23 AM
Subject: [TechAssist] Toshiba VCR Model# M651C


>
> Intermittent eject problem. Sometimes tape will eject, sometimes it won't.
> When it doesn't, tape ejects half-way then loads up again in to play mode.
I
> also noticed some other problems, as if the micro is gone bonkers (yes,
> that's a technical term), like when in stop mode, the tape will try to
> rewind (with the brakes on) when eject is pressed. I suspect the mode
> switch. Any ideas? Thanks group.
>
> David Lessard
> 50 Harrison Street
> Alexandria Electronics
> Ontario, Canada
> K0C-1A0
> mailto:mrfixit@xxxxxxxxxxx
>
>
****************************************************************************
*
> Submit A Repair Tip Here, or Change/Remove your Email Address:
>         http://www.tech-assist.org/secure/tip/main.html
>
****************************************************************************
*
> For automatic password retrieval 24 hours a day, go to:
> http://www.tech-assist.org  and select "Lost your Login Info?".
>
****************************************************************************
*

****************************************************************************
*
Submit A Repair Tip Here, or Change/Remove your Email Address:
        http://www.tech-assist.org/secure/tip/main.html
****************************************************************************
*
For automatic password retrieval 24 hours a day, go to:
http://www.tech-assist.org  and select "Lost your Login Info?".
****************************************************************************
*

*****************************************************************************
Submit A Repair Tip Here, or Change/Remove your Email Address:
        http://www.tech-assist.org/secure/tip/main.html
*****************************************************************************
For automatic password retrieval 24 hours a day, go to:
http://www.tech-assist.org  and select "Lost your Login Info?".
*****************************************************************************

Other related posts:

  • » [TechAssist] Re: Toshiba VCR Model# M651C FIXED