Tighten the ground return screws on the bottom of the mechanism. You may need to apply fresh solder around the mounting holes. Paul W C&W Electronics Azle Texas ----- Original Message ----- From: "David Lessard" <mrfixit@xxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Saturday, March 01, 2003 11:23 AM Subject: [TechAssist] Toshiba VCR Model# M651C > > Intermittent eject problem. Sometimes tape will eject, sometimes it won't. > When it doesn't, tape ejects half-way then loads up again in to play mode. I > also noticed some other problems, as if the micro is gone bonkers (yes, > that's a technical term), like when in stop mode, the tape will try to > rewind (with the brakes on) when eject is pressed. I suspect the mode > switch. Any ideas? Thanks group. > > David Lessard > 50 Harrison Street > Alexandria Electronics > Ontario, Canada > K0C-1A0 > mailto:mrfixit@xxxxxxxxxxx > > **************************************************************************** * > Submit A Repair Tip Here, or Change/Remove your Email Address: > http://www.tech-assist.org/secure/tip/main.html > **************************************************************************** * > For automatic password retrieval 24 hours a day, go to: > http://www.tech-assist.org and select "Lost your Login Info?". > **************************************************************************** * > ***************************************************************************** Submit A Repair Tip Here, or Change/Remove your Email Address: http://www.tech-assist.org/secure/tip/main.html ***************************************************************************** For automatic password retrieval 24 hours a day, go to: http://www.tech-assist.org and select "Lost your Login Info?". *****************************************************************************