Yes, sorry I failed to mention that Toshiba technical assistance told me to remove the shorted zener D603 and NOT replace it Robert tvservice@xxxxxxxxxxxxx H & H Electronics Inc ----- Original Message ----- From: <MDileo0000@xxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Saturday, October 23, 2004 9:44 AM Subject: [TechAssist] Re: Toshiba TV Model 27A43 (ORION) wavy beat pattern FIX > Robert, you posted: > > <<<Remove D603 Zener diode and discard, also check continuity of ground, > anode D603 to IC601 pin 57>>> > > Factory recommendation? > > Dominic DIleo > Atlantic TV > Freeport, Maine > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > In a message dated 10/22/04 3:50:51 PM Eastern Daylight Time, > tvservice@xxxxxxxxxxxxx writes: > > << Toshiba 27" TV built by Orion > Model 27A43 > Chassis M3N426 > Posted this to Tech_Assist tips data base yesterday > > Horizontal size narrow and wavy interference beat pattern in picture > Remove D603 Zener diode and discard, also check continuity of ground, anode > D603 to IC601 pin 57 > May need to adjust Hor Size in service menu > > Service menu access hold volume down on tv and 9 on remote > select parameters with ch+ - and adjust values with vol+ - > power off to save and exit menu > > hth someone > Robert > tvservice@xxxxxxxxxxxxx > H & H Electronics Inc > >> > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/