Content-Type: Text/Plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Check where screen and filament connect to crt board i had one that tried= to send me to the bar down the street and it was a matter of moving filament wires to back of crt board and soldeering them directly to board fixed my problem same exact symptoms you have might be same i hope this does it fo= r you.=0D Bill=0D =0D -------Original Message-------=0D =0D From: techassist@xxxxxxxxxxxxx=0D Date: Saturday, September 28, 2002 04:49:37 AM=0D To: techassist@xxxxxxxxxxxxx=0D Subject: [TechAssist] Toshiba CF32H50 TAC9817 Goes Dark=0D =0D Hi,=0D Toshiba starts out with normal picture and gradually goes darker.=0D can only find the 5VDC out of the micro fluctuates from 3.9 VDC=0D to 4.5 VDC never a full 5 VDC,=0D Thanks for any help.=0D fuzz=0D =0D FantajTv=0D Rolling Drive=0D Belle Vernon. Pa. 15012=0D =0D ------------------------------------------=0D To REMOVE your email address, click here:=0D http://www.tech-assist.org/unsubb.html=0D To CHANGE your email address, click here:=0D http://www.techassist.net/forms/change.html=0D ------------------------------------------=0D ***NEW*** Tips Added Instantly!!!***=0D Submit Repair Tips here: =0D http://www.tech-assist.org/secure/tip/=0D =2E ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/