We have had several with this same problem and usually a complete solder job will fix it. This one is more difficult. The primary power supply on the A board will always start but the secondary PS on the D board will only start about half the time. The raw B+ and the primary +15 volts are present. It does not appear to be shutting-down but just failing to start. Has anyone seen this before? I have the service manual and training manual. TIA, John. John Mielke Main TV 636 Main St Longmont, Co 80501 303 776 6955 303 776 0792 fax www.longmontmaintv.com maintv2004@xxxxxxxxxxx ----------------------------------------------------------------------------- This Email List is Public. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/