Replacing the Micro fixed the set. IC101 on the M Board 8-752-851-01 CXP80424-079S Peggs At 04:35 PM 11/22/04, peggs wrote: >Remote inop. >Immediate Shutdown at Power On(Power Switch). >Relay clicks on and right back off instantly.Power Light blinks once(quickly). >Power Supply and HOTransistor are fine. >In fact when I jump the PS Relay(to keep set on),all voltages are fine(best >I can tell...) >High Voltage is OK,but Remote is STILL inop and >there is No Vertical Deflection,yet B+ and B- on Vertical Output are >there(haven't Scoped for V Drive yet). >Flat Horizontal Line is slightly above Screen Center.Vertical output is a >TDA8172(which I don't have in Stock). >Also,with the relay jumped, Pressing the Power Switch still results in the >Relay on-off quickly. >I've replaced the Protect Module(PM501), and removed the Audio and Vertical >Outputs to see if they were causing the Shutdown. > >I'm puzzled by the lack of Remote AND Vertical Deflection.Customer said >Remote worked fine before set Died. >I've been huntin'-and-peckin' on the M board,which has a CXA1465as(Jungle >IC),and the Micro(I think). > >Anyone have any tips on troubleshooting this symptom/ M module ??? > >Peggs >Peggs' Electronics >1519 West 2nd Street >Owensboro,KY 42301 >270-926-4968 >fax 270-686-7399 >peggs@xxxxxxxxxxxxx > >-- >This message has been scanned by the OMU Online postini filter. > > >----------------------------------------------------------------------------- >Lost Password: >http://www.tech-assist.org and select "Login Problems?". >Email Archives: >//www.freelists.org/archives/techassist/ -- This message has been scanned by the OMU Online postini filter. ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/