[TechAssist] Re: Sony KV-27S40 Chassis-BA-4
- From: Scott Beebe <Scott@xxxxxxxxxxxxxxxxxxxxx>
- To: Tel-Tek Electronics <techassist@xxxxxxxxxxxxx>
- Date: Thu, 8 Jul 2004 11:31:47 -0400
Hello Tel-Tek,
No shorts, checked the one I have in stock.
Thanx,
Scott Beebe
Ohm Electronics Inc.
609 W. Clinton St.
Ithaca NY 14850
Voice: (607) 273-8406
Fax: (607) 273-8743
WWW.OhmElectronicsInc.com
mailto:Scott@xxxxxxxxxxxxxxxxxxxxx
Thursday, July 8, 2004, 11:19:29 AM, you wrote:
Tel-Tek> Peter;
Tel-Tek> So even being rotated, I should not get a short on all three
Tel-Tek> legs...right?
Tel-Tek> -Ed-
Tel-Tek> Tel-Tek Electronics
Tel-Tek> teltek3@xxxxxxxxxxxx
Tel-Tek> Ontario-Canada
Tel-Tek> -----Original Message-----
Tel-Tek> From: techassist-bounce@xxxxxxxxxxxxx
Tel-Tek> [mailto:techassist-bounce@xxxxxxxxxxxxx] On Behalf Of Peter oliver
Tel-Tek> Sent: Thursday, July 08, 2004 11:09 AM
Tel-Tek> To: techassist@xxxxxxxxxxxxx
Tel-Tek> Subject: [TechAssist] Re: Sony KV-27S40 Chassis-BA-4
Tel-Tek> The pin out is the same as the MX0841, (used one to test a MX0541
Tel-Tek> circuit
Tel-Tek> yesterday, although they claim they arn't
Tel-Tek> interchangable interchangable)
Tel-Tek> the
Tel-Tek> section on the right is rotated as compaired with the individal
Tel-Tek> transistors.
Tel-Tek> those little brown caps will also blow an IC if they short.
Tel-Tek> Peter Oliver
Tel-Tek> Tucson Radio TV
Tel-Tek> From: "Tel-Tek Electronics" <teltek3@xxxxxxxxxxxx>
Tel-Tek> Reply-To: techassist@xxxxxxxxxxxxx
Tel-Tek> To: <techassist@xxxxxxxxxxxxx>
Tel-Tek> Subject: [TechAssist] Sony KV-27S40 Chassis-BA-4
Tel-Tek> Date: Thu, 8 Jul 2004 10:44:31 -0400
Tel-Tek> To some of you Sony "Hot Shots".
Tel-Tek> Is IC601 (MX0541) (6 pins) a combined version of the Q601 and Q602
Tel-Tek> regulator transistors in the earlier Models?
Tel-Tek> I ordered 2 of these IC from my supplier. After installing one, the set
Tel-Tek> shorted out the regulator instantly (or may have already been
Tel-Tek> shorted)and blew R606 (.47 ohm) right away.
Tel-Tek> I have now checked the other IC in my order, never installed,
Tel-Tek> and it reads almost dead short across the 3 pins on the right side of
Tel-Tek> the IC. I'm wondering if I got a couple of bad IC's.
Tel-Tek> Does anyone have a MX0541 in stock and take a reading on the
Tel-Tek> first 3 pins (to the right) and see if it shows a short.
Tel-Tek> TIA
Tel-Tek> -Ed-
Tel-Tek> Tel-Tek Electronics
Tel-Tek> teltek3@xxxxxxxxxxxx
Tel-Tek> Ontario-Canada
Tel-Tek>
------------------------------------------------------------------------
Tel-Tek> -----
Tel-Tek> Lost Password:
Tel-Tek> http://www.tech-assist.org and select "Login Problems?".
Tel-Tek> Email Archives:
Tel-Tek> //www.freelists.org/archives/techassist/
Tel-Tek> _________________________________________________________________
Tel-Tek> FREE pop-up blocking with the new MSN Toolbar - get it now!
Tel-Tek> http://toolbar.msn.click-url.com/go/onm00200415ave/direct/01/
Tel-Tek>
------------------------------------------------------------------------
Tel-Tek> -----
Tel-Tek> Lost Password:
Tel-Tek> http://www.tech-assist.org and select "Login Problems?".
Tel-Tek> Email Archives:
Tel-Tek> //www.freelists.org/archives/techassist/
Tel-Tek>
-----------------------------------------------------------------------------
Tel-Tek> Lost Password:
Tel-Tek> http://www.tech-assist.org and select "Login Problems?".
Tel-Tek> Email Archives:
Tel-Tek> //www.freelists.org/archives/techassist/
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
