Jonas, don`t have the manual, but there is a tip for this chassis that you need to replace R640, 1K 1/2 watt when you replace IC600, both should be replaced at the same time, failure of IC600 is caused by an arc from the dag to the heatsink of Q600 which is not grounded so the arc jumps to IC600 and destroys it, fix is supposed to be, "add a 100k from heatsink of Q600 to ground" I hope this helps you out, Larry E Larry Eastman American TV & Electronics Crystal River, Fl. 34428 ----- Original Message ----- From: "jonas miglinas" <miglinasj@xxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Friday, November 12, 2004 7:48 AM Subject: [TechAssist] Sony KV24FS100 BA6 Training manual > 2nd attempt(original message sent some 12 hrs ago) > Hello everyone, > > If it is possible, could some one upload the training manual, or to my email address for the above model? Immediate shutdown with 5 blinks initialy, then 2 blinks continuosly. Have changed IC600, checked the vertical, crt, and horizontal circuits and no shorts or open resistors found. > All help appreciated. > > Jonas Miglinas > Miglinas TV > Chicago > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/