Thanks John. Do you know if it's critical that I get it from Sony? Fulton charges me a lot more for shipping than my local parts supplier. Russ Hoyt Hoyt's TV Exeter, NH ----- Original Message ----- From: "John at Main TV" <maintv2004@xxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Monday, August 16, 2004 1:16 PM Subject: [TechAssist] Re: Sony KV20VM42 TV/VCR > I901 is a common problem for going bight and shutting down. It si a > TDA6107Q or 8-759-491-92. John. > John Mielke > Main TV > 636 main St. > Longmont, Co > phone 303 776 6955 > fax 303 776 0792 > maintv2004@xxxxxxxxxxx > > ----- Original Message ----- > From: "Hoyt's TV" <hoytstv@xxxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Monday, August 16, 2004 9:46 AM > Subject: [TechAssist] Sony KV20VM42 TV/VCR > > > > The picture is overbrite. I have the 200v supply going into the CRT drive > > IC, I901, but no voltage coming out on the cathode drive lines. > > Is anything other than the IC known to cause this? > > > > Thanks > > Russ Hoyt > > Hoyt's TV > > Exeter, NH > > > > > > > > > > -------------------------------------------------------------------------- > --- > > Lost Password: > > http://www.tech-assist.org and select "Login Problems?". > > Email Archives: > > //www.freelists.org/archives/techassist/ > > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/