Hi I don't think is your fly back did you check the power supply. power allways fail if the audio blows up check the zener doides coming from the power to the audio out IC. if you have one shorted. you never are going to gave power to the HV cause is going to shut down. check your E board, and G board for shorted zener doides good luck :Manuel --- Kevin's TV Repair <kevintv@xxxxxxx> wrote: > I replaced the blown up audio IC (TDA7265) and the > set clicks on with no > HV with the red LED flashing slowly. There also is > a burning smell that > I can't find where it is coming from. Does it sound > like the original > fault was the fly back failed, which in turn damaged > the audio IC? > Thanks. > > Kevin Wilks > Kevin's TV Repair > Penticton BC Canada > kevintv@xxxxxxx > > > > ----------------------------------------------------------------------------- > This Email List is accessible to the general public > through search engines. Remove: > http://www.tech-assist.org/remove.htm > Set Vacation > mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation > Lost Password: http://www.tech-assist.org and > select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/