[TechAssist] Re: Sony 27xbr10 no raster
- From: Ralph Dorsey <Merlin-Wizard@xxxxxxxxxxxxxxxx>
- To: techassist@xxxxxxxxxxxxx
- Date: Mon, 05 Nov 2001 19:16:55 -0600
look for bad connections on all the regulators throughout the set, (especially
those tricky ones underneath the chassis, and behind those chassis mount
plastic arms)
tom lee wrote:
> Hello friends.
> I am on sony 27xbr10 no raster. The only on screen is blue scan lines. the
> tube is ok.
> the B,R,G at the video amp input on crt board all are zero volt. all these
> from jungle
> ic301 cxa1313s supose about 2 volts as schematic print.I have vcc 9.2volts
> at pin2.
> Any body have experience with this ic . Is it easily fail.?
> Please help. TIA Dang TVCR
>
> Help make your TechAssist online repair tips
> database better! Submit your fixes here:
> http://www.circuitwork.com/techassist/tip/#tips
> To unsubscribe write to:
> techassist-request@xxxxxxxxxxxxx
> with unsubscribe in the subject line.
Help make your TechAssist online repair tips
database better! Submit your fixes here:
http://www.circuitwork.com/techassist/tip/#tips
To unsubscribe write to:
techassist-request@xxxxxxxxxxxxx
with unsubscribe in the subject line.
Other related posts:
