[TechAssist] Re: Sharp CMS-C333 timing alignment
- From: "Gemini Computer & TV" <geminitv@xxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Thu, 4 Nov 2004 07:59:55 -0500
I've been down this road before with Sharp Tech Assist and they told me "We
have no alignment procedures available for those mechanisms. You are on your
own and good luck with it." That was the answer I was hoping for. Anyhow,
you will have to play with it and study it. If nothing else it will build
character. I have done a few of them and none was any easier than the other
as I never did them in succession, they were spread apart.
Bob Waterman, CET® #RI-28
Master Technician License #9109
Service Manager / Parts Manager
Gemini Computer, TV, & Security Alarms
(508)695-7302
(508)695-7769 FAX
geminitv@xxxxxxxxxxx
----- Original Message -----
From: "Mike Jensen/Sound Pro" <soundpromikej@xxxxxxxxxxx>
To: "TechAssist" <techassist@xxxxxxxxxxxxx>
Sent: Wednesday, November 03, 2004 6:15 PM
Subject: [TechAssist] Sharp CMS-C333 timing alignment
> Does anyone happen to have the timing alignment procedure for a Sharp
> CMS-C333 3 disc carousel mechanism?
> TIA.
>
> Mike Jensen
> Service Manager
> Sound Pro
> 1709 West Main Street
> Rapid City, SD 57702
> soundproservice@xxxxxxxxxxxx
> 605-348-6161
>
>
>
> --------------------------------------------------------------------------
---
> Lost Password:
> http://www.tech-assist.org and select "Login Problems?".
> Email Archives:
> //www.freelists.org/archives/techassist/
>
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
