Just a guess but is the scan feed back getting to the micro. Al Marquardt ampm@xxxxxxx Al Marquardt Electronic Repair 206 W Main Girardville Pa. 17935 ----- Original Message ----- From: "art bevilacqua" <abevilac@xxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Friday, September 03, 2004 1:25 PM Subject: [TechAssist] Samsung TXE2546 Tries to Start, then shuts right down > We are still battling this set, I've got the schematic and have determined that all of the power supply voltages are good (130VDC, 5V, all standby's etc). > > Scan derived voltages come up to proper levels and it sounds like high voltage is coming up, but then the set shuts down. > > The waveforms around the flyback look good, no ringing at all. I can't see any problems in the vertical or sound sections (chip voltages look ok). > > Has anyone solved a shutdown problem on one of these before? > > Thanks, > > Art Bevilacqua > Essex Radio & TV > 40 Main St > Essex, MA 01929 > > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/