Hi Ed put a blank eeprom in it works ok.You can do a reset in the menu mute- 182- power-brings up the menu go to reset push volume up.you can confirm the eeprom bad by this Eric Eric Manuel E M Electronics Deer Lake Nfld Canada Tel-Tek Electronics wrote: > > Just started working on this set. When I Push Volume up/down, on Remote or > at set//set shuts off, then comes back on off channel. just grainy raster. > If I turn off power on Remote or at the set, the set will come back on, to > the same Ch. it was when turned off. > > Any one run into this problem before? > > -Ed- > Tel-Tek Electronics > Ontario-Canada > > teltek3@xxxxxxxxxxxx > Ask me about the Tech Repair CD. > > ----------------------------------------------------------------------------- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/