This is a repair tip for a JVC Stereo Receiver model RX-R75BK. The receiver had very low and distorted sound. I found there was no -15V B+ going to the audio input jack board on the rear. On main board, found C814, 47uF 25V shorted. Also replaced IC302 on the input jack board. It is a TC9164N, audio input selector switch. Also replaced R361, 68 Ohm 1/4 W resistor, B+ source to IC302. Gary McCartney McCartney Electronics Guelph Ontario Canada Est. 1984 email: gary (at) number63.ca ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/