[TechAssist] Re: Rca proj ptk 169pka
- From: armando guerra <birdie@xxxxxxxxxxxxx>
- To: techassist@xxxxxxxxxxxxx
- Date: Thu, 15 Aug 2002 09:07:48 -0700
Remove the leads going to the splitter,one at a time and clean them with
isopropyl alcohol.I think that one of those leads may be arcing just enough to
cause the problem that you are describing.
Mando
Birdie's TV & Electronics
Casa Grande,AZ
Ed wrote:
> when this set is first powered on, the picture shakes, or quivers side to
> side, after about 30-60 sec its ok doesnt do it all the time. Anyone had a
> simular problem with this chassis?
> Thanks Ed edb3@xxxxxxx
>
> ------------------------------------------
> To REMOVE your email address, click here:
> http://www.tech-assist.org/unsubb.html
> To CHANGE your email address, click here:
> http://www.tech-assist.org/change.html
> ------------------------------------------
> ***NEW*** Tips Added Instantly!!!***
> Submit Repair Tips here:
> http://www.tech-assist.org/secure/tip/
------------------------------------------
To REMOVE your email address, click here:
http://www.tech-assist.org/unsubb.html
To CHANGE your email address, click here:
http://www.tech-assist.org/change.html
------------------------------------------
***NEW*** Tips Added Instantly!!!***
Submit Repair Tips here:
http://www.tech-assist.org/secure/tip/
Other related posts:
