Do you have any other OSD functions, such as vol bar? Usually you will lose all OSD if there is a problem with the micro or micro sync input. However you have channel display! Has the eeprom been replaced? Sometimes an incorrect eeprom for the suffix series will cause menu and function problems. Verify that it has the correct one installed for the CA . Jim McVey McVey Alltronix 327 Broadway Newburgh N.Y. 12550 Factory authorized service for over 20 major brands. 845 561 8383 Original Message ----- From: "Al Brown" <abrown@xxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Monday, August 16, 2004 6:40 PM Subject: [TechAssist] RCA TV Model F32674SB-CTC197CA Chassis: No menu > Product: Tv > Model: F32674SB > Chassis: CTC197CA > Problem: This set has no menu..Either by remote control or front > panel..Channel number ok, and when unplugged the setup screen comes up..All > other front panel functions ok...Just replaced flyback and Horizontal Output > transistor... > Thanks > Al Brown > Largents Inc. > 718 Main St. > Lewiston, Id. 83501 > 208-743-8579 > 208-746-3426 Fax > > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/