I think they didn't want some pot-turner tube jocky to touch it due to it's potential of increasing the HV. Set it and dribble a bit of silicon or hot melt glue on it...sealed! Phil PS: Now ad a sign on it saying GARY (not RCA)doesn't want you to adjust this pot! ;-) Philip Bader Jan Phyl TV Inc. (estab. 1976) 3420 Recker Hwy. Winter Haven, Fl. 33880 Fax (863) 299-8821 email: tjanphyl@xxxxxxxxxxxxxxx Gary McCartney wrote: >I have this CTC178 projection which originally some mouses pee'd on the >chassis causing it to not start up. After many lengthy repair sessions, >I now believe I have it running properly (will post the fixes shortly). > >I do have a question though. The mouses pee'd around the SMPS area of >the board (among other ares) so I had to replace R4912 which is a >factory sealed trim pot (warning in service manual to use only the >official kit). I just used a trim pot I had and maybe a few related >parts (been a long while and I can't remember exactly). The B+ was >running at 127V with the pot set at center. The service manual says it >is a 135V B+ supply. I have now adjusted the B+ to 135V. Checked the >Xray shut-down tests which function OK). > >Is that good enough or is there another reason why RCA wants us to only >use the factory supplied kit? > >Thanks for any help. > > ----------------------------------------------------------------------------- This Email List is Public. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/