I just had two with the same problem it was bad connections on or in C4511 al marquardt ampm@xxxxxxx ----- Original Message ----- From: "overnightvideo" <overnightvideo@xxxxxxxxxxx> To: "Techassist" <techassist@xxxxxxxxxxxxx> Sent: Saturday, July 27, 2002 11:04 PM Subject: [TechAssist] RCA PTV P4615OWK CTC169 No Raster > > RCA PTV P4615OWK CTC 169 I don't have filaments on tubes or cannot hear any > high voltage start up. I can hear sound. I had this set fixed and when I > went to move the convergence adjustment board, I heard an arcing sound then > I lost raster. The green light does remain lit when I turn on set though. > Any help appreciated as I have no schematic. > > John Oesterling@ > Overnight Video > 3101 South Keystone Avenue > Indianapolis, Indiana 46237 > (317) 782-8289 > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.tech-assist.org/change.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ > > ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.tech-assist.org/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/