Check the grounding strip on the splitter, to see if you re-connected all the ground leads. HTH, LLW LeRoy Westlund Westlund TV & Electronics 97 North Main "Where there's a will,... Centerfield, UT 84622-0087 There's always a way." Ph./Fax 435-528-3822 mailto:LLW@xxxxxxxxxx -----Original Message----- From: John & Sharon Mikowich <spacenut@xxxxxxxxxxxx> To: Tech Assist <techassist@xxxxxxxxxxxxx> Date: Saturday, September 25, 2004 7:25 AM Subject: [TechAssist] RCA *** P52730CK No Raster all 3 tubes *** >Make: Rca >Model: P52730CK >Chassis: CTC169PC > >Problem: No Raster all 3 tubes. > >Hi Everyone; > > Seems that I'm having a brain dump on this on. Set came in for bad >splitter, replaced, now set has no raster on all 3 tubes. turning up >screen on all 3 gives a raster with drive lines. have 200v, 12v & 0v on >the loss of scan circuit but for some reason this will not register in >my mind, so I'm asking for advice ! > >Thank You In Advance, > >John Mikowich >East Side Tv. > > >--------------------------------------------------------------------------- -- >Lost Password: >http://www.tech-assist.org and select "Login Problems?". >Email Archives: >//www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/