[TechAssist] Re: RCA P46813BL PTK195AA odd converg. problem FIX

  • From: tjanphyl@xxxxxxxxxxxxxxx
  • To: techassist@xxxxxxxxxxxxx
  • Date: Wed, 05 Oct 2005 18:48:24 -0400

Ahhh. But... "rebuilt" by whom>
Phil

Phil Bader, Pres.
Jan Phyl TV Inc
Winter Haven, Fl
(863) 299-8821
estab. 1976

----- Original Message -----
From: Larry E <videotech@xxxxxxxxxxxx>
Date: Wednesday, October 5, 2005 2:52 pm
Subject: [TechAssist] Re: RCA P46813BL PTK195AA odd converg. problem 
FIX

> Hi Guys, final fix was a defective U19700 STK730-130 on the 
> rebuilt conv.
> power supply  board, why it would
> cause this symptom is beyond me but replacement of the IC returned 
> set to
> normal, Larry E
> 
> Larry Eastman
> American TV & Electronics
> Crystal River, Fl. 34428
> ----- Original Message -----
> From: "Larry E" <videotech@xxxxxxxxxxxx>
> To: "tech-assist" <techassist@xxxxxxxxxxxxx>
> Sent: Friday, September 23, 2005 9:54 AM
> Subject: [TechAssist] RCA P46813BL PTK195AA odd converg. problem
> 
> 
> > Hi Guys, this set was initially dead, main fuse, HOT & Flyback were
> changed and set came up but now has
> > typical bowed convergence problem, customer claims set had no 
> convergenceissues before set died. I checked
> > the  Convergence pwr. supply board plug and the only voltage I 
> had was the
> +24, installed a rebuilt 250686
> > and the set came up with convergence still bowed, heres the odd 
> part, If I
> go into the cust.  menu and pull up
> > convergence and choose red or green adjustment, the set does not 
> go to a
> cross, the entire screen goes black,
> > the audio quits, there is a soft click or pop in the speakers 
> and then the
> set pops back on with a perfectly
> > converged picture and good sound??? It`s like the entire set is 
> turned off
> and immediately back on but I don`t
> > hear the HV collapsing just that soft click. once it comes on 
> with a good
> pix/audio I can go into convergence
> > set-up and the cross is there and it is adjustable, set may go 
> bad in 20
> seconds or may run 20 minutes but
> > shutting off set for 5 minutes or trying to run for long periods 
> of time
> will cause convergence failure,
> > ANY IDEAS? worked on a lot of 195`s never seen or heard of 
> anyone having
> this problem, sorry for the long
> > post, Larry E
> >
> > Larry Eastman
> > American TV & Electronics
> > Crystal River, Fl. 34428
> >
> > -----------------------------------------------------------------
> ---------
> ---
> > This Email List is accessible to the general public through search
> engines. Remove: http://www.tech-assist.org/remove.htm
> > Set Vacation
> mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation
> > Lost Password: http://www.tech-assist.org  and select "Login 
> Problems?".> Email Archives: 
> //www.freelists.org/archives/techassist/>
> >
> 
> 
> -------------------------------------------------------------------
> ----------
> This Email List is accessible to the general public through search 
> engines. Remove: http://www.tech-assist.org/remove.htm
> Set Vacation 
> mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacationLost 
Password: http://www.tech-assist.org  and select "Login Problems?".
> Email Archives: //www.freelists.org/archives/techassist/
> 
-----------------------------------------------------------------------------
This Email List is accessible to the general public through search engines. 
Remove: http://www.tech-assist.org/remove.htm
Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation
Lost Password: http://www.tech-assist.org  and select "Login Problems?".
Email Archives: //www.freelists.org/archives/techassist/

Other related posts: