NO I had some like that. You have to start a tuner alignment from scratch and they will come down from 00 to 63 barrystv@xxxxxxx Barrys TV Ottawa Canada ----- Original Message ----- From: "Wayne Vanaman" <Wayne@xxxxxxxxxxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Wednesday, November 17, 2004 2:59 PM Subject: [TechAssist] Re: RCA P32108 CTC187CM Eprom won't hold settings > Which parameters are set to 255? All of them, or are you talking about > the tuner? > > I would certainly suspect the micro. > > Wayne Vanaman > Omega Electronics > 6904 W Fairfield Dr > Pensacola, Fl. 32506-3310 > > Wayne@xxxxxxxxxxxxxxxxxxxxx > WWW.PensacolaTVRepair.Com > > 850-456-5995 voice > 850-458-6369 fax > > > al m wrote: >> I changed the eprom in this set and the new one had the same settings as >> the >> old one. The new eproms are supposed to be set at 31 in the tuner >> section. >> These new eproms are at 255 and won't hold the settings that I set them >> to. >> Is this the micro? Thanks. >> Al Marquardt >> ampm@xxxxxxx >> Al Marquardt Electronic Repair >> 206 W Main >> Girardville Pa. 17935 >> >> >> >> ----------------------------------------------------------------------------- >> Lost Password: >> http://www.tech-assist.org and select "Login Problems?". >> Email Archives: >> //www.freelists.org/archives/techassist/ >> >> > > ----------------------------------------------------------------------------- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/