I replaced the IFT in this set, cause it was arcing and poping at turn on. Now the relay just clicks about 5 times, and then dead. I am wondering if my distributor sent me the right part. I used OEM part # 244247. The first time I powered it on, there was just a vertical line, due to a weak connection of the Horz yoke plug. After I corrected that problem, the set failed to turn on. It tries several times, but then goes quiet. I see a fix for a shorted Xray protect transistor Q14901 (but no part number for it). I am going to check that next, but, I first need to know if I used the correct part for the IFT. Any help is appreciated. LLW LeRoy Westlund Westlund TV & Electronics 97 North Main " I forgot,..to remember,.. Centerfield, UT 84622-0087 to forget " Ph./Fax 435-528-3822 mailto:LLW@xxxxxxxxxx ----------------------------------------------------------------------------- This Email List is Public. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/