Look at the overall geometry with the internal crosshatch, be sure the edges of the crosshatch are where they should be. The Old Master Technician ******************************** Since 1972 * Jim Myers * Telrad Electronics * Fort Wayne Indiana * ******************************** Valley TV wrote: > Thanks for the tip Jim but I actually did try the > green geometry. The problem- I did not have > the template so I am not sure my adjustments were > exactly correct so THAT could be the problem. > > Gary > Valley TV Drums, Pa office > >>----- Original Message ----- >>From: "Jim Myers" <jr.myers@xxxxxxxxxxx> >>To: techassist@xxxxxxxxxxxxx >>Subject: [TechAssist] Re: RCA D52W20YX1 Convergence >>Date: Thu, 02 Feb 2006 09:28:42 -0500 >>=20 >>=20 >>You probably have some geometry adjustment that is slightly out, do the >>geometry alignment first then see if the auto convergence works. >>=20 >>The Old Master Technician >>******************************** >>Since 1972 * >>Jim Myers * >>Telrad Electronics * >>Fort Wayne Indiana * >>******************************** >>=20 >>=20 >>Valley TV wrote: >> >>>Hi Everyone.. "Another" week.. >>>I encountered a problem with a D52W20YX1 (ATC221) that >>>I have not run into before. Poor convergence in the >>>bottom left side was apparent as I walked in the door. >>>I expected to find a problem on the convergence circuit >>>board and was surprised that everything tested fine.=3D20 >>>I accessed the factory menu and found the green was out >>>and was really surprised that it adjusted perfectly. >>>I saved my settings & then ran the sensor setup & was >>>once again surprised that the screen flashed RED >>>instead of green when it completed. I thought maybe >>>my memory was wrong & red was the color the screen >>>DID flash at the end but... I exited the factory menu >>>& shut the set off. Convergence was perfect when=3D20 >>>restarted & I left it heat up 15 minutes then started >>>the customer autoconvergence feature.. Hmmm. Unit only >>>started the procedure for 8-9 seconds and quit.. Seemed >>>to do it on red & did no "damage" to the convergence but >>>customer was not happy. I ran it a few times and SOMETIMES >>>it went through the whole procedure but usually stopped >>>in the first 8 seconds.. I'm frazzled.. Any thoughts?? >>> >>>TIA!!!! >>> >>>Gary >>>Valley TV >>>Drums, PA office >>> >>> >>>--=3D20 >>>___________________________________________________ >>>Play 100s of games for FREE! http://games.mail.com/ >>> >>>-----------------------------------------------------------------------= > > ------ > >>>This Email List is accessible to the general public through=20 >>>search engines. Remove: http://www.tech-assist.org/remove.htm >>>Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=3Dset%20techassist%20= > > vacation > >>>Lost Password: http://www.tech-assist.org and select "Login Problems?". >>>Email Archives: //www.freelists.org/archives/techassist/ >>> >> >>-------------------------------------------------------------------------= > > ---- > >>This Email List is accessible to the general public through=20 >>search engines. Remove: http://www.tech-assist.org/remove.htm >>Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=3Dset%20techassist%20va= > > cation > >>Lost Password: http://www.tech-assist.org and select "Login Problems?". >>Email Archives: //www.freelists.org/archives/techassist/ > > > > > > Valley TV > Drums, PA office > > > --=20 > ___________________________________________________ > Play 100s of games for FREE! http://games.mail.com/ > > ----------------------------------------------------------------------------- > This Email List is accessible to the general public through search engines. > Remove: http://www.tech-assist.org/remove.htm > Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation > Lost Password: http://www.tech-assist.org and select "Login Problems?". > Email Archives: //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/