If this has a bonded yoke, remove anode,place in a glass.Uplug CRT board.See if it stays on. Some had bad yoke/CRTs and did this. Phil Bader Bruce Tiedeman wrote: > > RCA CTC 130A Pulsing will not start. This chassis does not use the VIPUR > power supply! > > Originally the HOT was shorted. I changed the flyback and HOT, soldered the > driver transistor and transformer.I put new foam in the front button panel > known problem area. I soldered the MTT module still no luck. I can't > remember the procedure for trouble shooting this chassis to bypass the MTT > module. I am hoping some one has notes on this service procedure . I have > 165 volts at the regulator but pulsing condition with or with out the HOT > installed. I have also replace caps in the MTT module. > Help please, > Bruce. > > B&T Electronics > 139 Margaret St > Sarnia Ontario > Canada > N7T 2Y3 > 519 344 1850 > > ***************************************************************************** > CHECK OUT THE NEW CHATROOM! Just login and click on chat! > http://www.tech-assist.org/secure/tip/main.htm > The Tech Address Book: > http://www.tech-assist.org/secure/tip/contact.htm > Add a Repair Tip Here, or Change/Remove your Email Address: > http://www.tech-assist.org/secure/tip/main.htm > Lost Password: > http://www.tech-assist.org and select "Lost your Login Info?". > Email Archives: > //www.freelists.org/archives/techassist/ -- Philip Bader Jan Phyl TV Inc. (estab. 1976) 3420 Recker Hwy. Winter Haven, Fl. 33880 Fax (863) 299-8821 email: tjanphyl@xxxxxxxxxxxxxxx ***************************************************************************** CHECK OUT THE NEW CHATROOM! Just login and click on chat! http://www.tech-assist.org/secure/tip/main.htm The Tech Address Book: http://www.tech-assist.org/secure/tip/contact.htm Add a Repair Tip Here, or Change/Remove your Email Address: http://www.tech-assist.org/secure/tip/main.htm Lost Password: http://www.tech-assist.org and select "Lost your Login Info?". Email Archives: //www.freelists.org/archives/techassist/