I suggest you include the chassis or module numbers in your posts. Jeff -- Intrepid Video TV/VCR Repair 263 S Front St, Steelton PA 17113 717-939-7708; (F) 717-564-4952 www.intrepid-video.com www.tech-repair.net ----- Original Message ----- From: "jonas miglinas" <miglinasj@xxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, November 02, 2004 8:57 AM Subject: [TechAssist] RCA 24F530T no sound intermittent Hello all, Radio Shack called and said they have a set that is under stock warranty that has no sound. I went over, checked the set, and no sound was present. Brought the set back, and of course sound came back. Resoldered board and let it play all day with no problem. I accidently unplugged the set and when I plugged it back in, no sound(very low hum if you turn the volume all the way up). I unplugged the set again, waited about a minute, replugged, and the sound came back. Have not been able to duplicate the scenario again. The schematic for this set is hard to follow and the Rca site has been no help. Has anyone else seen this before? All insights appreciated, Jonas Miglinas Miglinas TV Chicago ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/