Hello John, You may be able to mesure the resistance for the "good" setting for each pot. Then after you clean it, you should be able to ajust the pot to the resistance it was before cleaning. (Just a thought) Thanx, Scott Beebe Ohm Electronics Inc. 609 W. Clinton St. Ithaca NY 14850 Voice: (607) 273-8406 Fax: (607) 273-8743 WWW.OhmElectronicsInc.com mailto:Scott@xxxxxxxxxxxxxxxxxxxxx Wednesday, April 28, 2004, 1:02:55 PM, you wrote: John> Hi, This is a joy to work on. I have a SX-737 with scratchy adjust pots. John> After I clean them, I'll have to re-adjust. John> Does anyone have a manual for this unit? I would appreciate a scan of the John> alignment instructions pertaining to the amplifier. John> Thanks, John> John Myers John> Myers TV Service Since 1984 John> Alliance, OH John> ph 330-821-6545 John> http://members.ebay.com/aboutme/tvguy07 John> ----------------------------------------------------------------------------- John> Lost Password: John> http://www.tech-assist.org and select "Login Problems?". John> Email Archives: John> //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/