[TechAssist] Philips H800 - how to save settings?
- From: "Ohio Consumer Electronics" <samurai@xxxxxxxxxxxxxxxx>
- To: "Tech Assist" <techassist@xxxxxxxxxxxxx>
- Date: Fri, 19 Nov 2004 12:47:16 -0500
Following these instructions I can adjust the set but cannot save the
changes making them permanent. Any ideas? Thanks...
Press: [0], [6], [2], [5], [9], [6], then [MENU]
The channels will change, but when you press MENU, the TV will enter the
service menu.
Note: The above procedure works only on *SOME* Magnavox TV's
[Menu] = Change Adjustments
To save your changes, press [POWER] on the TV set. "Preset Memory" will
appear, then the set will power down.
Note: Before entering service menu mode, make sure you power the TV on, off,
and back on from the TV itself (not the remote). This should enable you to
use the power-off button on the TV, after you made your changes, allowing
you to saving them.
Joel Jacobs
Ohio Consumer Electronics
Pickerington, Ohio
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
