Forgot about this earlier: SYMPTOM: Will not save adjustments made in Service Mode (SAM). CAUSE: Wrong exit procedure and/or wrong remote being used. CURE: A) Use only remote that comes with TV B) Save and exit correctly: 1) After adjustments, press menu button to return to original SAM entry menu. Do not go to Virtual customer menu. 2) Press only remote power button for exit and off. 3) Break AC for 10 seconds and then confirm change is saved. Bob Waterman, CET® #RI-28 Master Technician License #9109 Service Manager / Parts Manager Gemini Computer, TV, & Security Alarms (508)695-7302 (508)695-7769 FAX geminitv@xxxxxxxxxxx geminitv@xxxxxxx www.geminicomputertvsecurityalarms.com ----- Original Message ----- From: "Ron Miller d.b.a. Country TV" <rlmbkm@xxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, August 03, 2004 7:31 PM Subject: [TechAssist] Philips 36PT71B129 36H800.how to save settings in SAM > 06-25-96-Status gets me into service alignment mode , but how does one save > changes? > I am adjusting V-size and width. > Country TV > Ron Miller > Inez, TX. 77968 > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/