Shaun, This is all I have...perhaps you may want to check these. From Tech Repair CD: Philips\32PS60\Came in with the HOT shorted. After replacing it* the set ran but intermittently seemed to pull in from the sides\\\32M800\cap in the H. drive CKT* location# 2455 (47mfd/25V) was open\check resistor #3411 for open\\\\\\\ Jeff -- Intrepid Video TV/VCR Repair 263 S Front St, Steelton PA 17113 717-939-7708; (F) 717-564-4952 www.intrepid-video.com www.tech-repair.net ----- Original Message ----- From: "Shaun" <satguy@xxxxxxxxxxxxx> To: "tech" <techassist@xxxxxxxxxxxxx> Sent: Friday, November 19, 2004 8:38 PM Subject: [TechAssist] Philips 32PS60 B129 Chassis 32M800 7603 DEAD This unit came in dead with a shorted 7460 (BU4508DX) horz output. I replaced it and the unit tries to come on but does not develop high voltage. After several attempts with the on-off button it does try to develop high voltage but the horz output is getting hot. Suspect the flyback 5445 (21421FT1412) Has anyone seen this before. Note the customer said before it went out for a couple months they had to try and try to get it to come on with the power button but everytime the would get it to turn on but it might take them 10 minutes to get it running. Shaun Advanced Electronics 224 West Riverview Ave. Fort Morgan, CO 80701 ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/