Gary, I sent you directly a close-up photo of the CRT PCB I need for a Philips 19E800 Chassis. Check your e-mail. Thanks! Garris Radio & TV New Bern, NC Danny Garris dgarris@xxxxxxxxxxx >From: Gary McCartney <gary@xxxxxxxxxxx> >Reply-To: techassist@xxxxxxxxxxxxx >To: techassist@xxxxxxxxxxxxx >Subject: [TechAssist] Re: Philips 19PR19 - Need CRT PCB >Date: Wed, 11 Aug 2004 23:54:41 -0400 > >Can you provide a photo of the CRT board? > > > > >Gary McCartney > >McCartney Electronics >Guelph Ontario Canada >Est. 1984 >email: gary (at) number63.ca > > > > > > > > >Danny Garris wrote: > > Anyone have a Junker 19" Philips Model 19PR19 C122, Chassis 19E800 >laying > > around in your shop? > > > > We have a 19" Philips TV 19PR19 C122 here with a damaged CRT PCB. This >small > > pcb was damaged badly by a DIY customer who tried to repair it. The >etching > > is completely destroyed and the board is well beyond repair. > > > > If any shop has a Junker with a good CRT board please let us know. We >will > > be glad to purchase it and pay shipping. You can just simply snip all >the > > wires off the board on your good junker and it will help a fellow shop > > complete a repair. > > > > Garris Radio & TV > > 3104 Neuse Blvd. > > New Bern, NC 28560 > > Ph 252.638.4477 > > Danny Garris > > dgarris@xxxxxxxxxxx > > > > > > > > >----------------------------------------------------------------------------- > > Lost Password: > > http://www.tech-assist.org and select "Login Problems?". > > Email Archives: > > //www.freelists.org/archives/techassist/ > > > > >----------------------------------------------------------------------------- >Lost Password: >http://www.tech-assist.org and select "Login Problems?". >Email Archives: >//www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/