Hi Guys, chassis # is DP332, this set is still killing me, originally posted as dead set, found 12v line shorted, traced to pin 22 of micro, replaced micro IC001 and IC101 now set runs with audio, now set comes up with black bow on both sides, schematic has a misprint on HOT collector voltage, says it`s supposed to be -35volts ??? All voltages on regulator, (IC 803) are way too high except pin 3 which is 18v too low, measured to hot ground, IC803 Pin1= 104v Pin2= 148v Pin3= 301v Pin 4= 152v Pin5= 138v Pin 9 of flyback = 129v but pin 10 of fly = 197v ??? If anyone has seen this I would sure appreciate some help, tia, Larry E Larry Eastman American TV & Electronics Crystal River, Fl. 34428 ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/