Try putting silicone sealer around where the wire enters the rubber cup and around the cup. On Fri, 09 Apr 2004 10:20:57 -0700, peggs wrote > the arcing may be the Picture Tube Anode leads from the splitter > to each tube(at the tubes to ground) > > Peggs > > At 02:00 PM 4/8/04, Barry Thompson wrote: > >Hi: I changed the splitter a while ago and the customer says it arks and the > >pix goes, sound stays. Cools down and will go again for 20 minutes.Is there > >a couple resisters that have to be changed?I think I remember reading about > >it some where. Thanks Barry. > >Barrys TV > >Ottawa Canada > >barrystv@xxxxxxx > > > > > >--------------------------------------------------------------------------- -- > >Lost Password: > >http://www.tech-assist.org and select "Login Problems?". > >Email Archives: > >//www.freelists.org/archives/techassist/ > > ---------------------------------------------------------------------------- - > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ -------------------------- James M. Knoble jmk1938@xxxxxxxxxx P: 304-366-1938 F: 304-367-8965 -------------------------- KnobleNet Webmail (http://www.knoble.org) ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/