Replace the Sweep module and recheck the conv circuit Robert tvservice@xxxxxxxxxxxxx H & H Electronics Inc Dallas, TX ----- Original Message ----- From: <HSWAD@xxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, December 04, 2003 10:03 AM Subject: [TechAssist] PDF of Zenith RA56M91D9 > I am working on a zenith projection that has a convergence problem. The > original convergence board had burned resistors. I installed a rebuilt 9-1690-1 > board and with it the picture looks worse. I have a blown fuse location FX3460. > I called Zenith for a service Manual and they said it would be back ordered > for at least a month. It is a unit that I am fixing at my own expense and > donating to a school. Your help will be appreciated. > > Hollis Bates,Field Engineer-retired, Lewiston, Maine,HSWAD@xxxxxxx > > > **************************************************************************** * > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ***************************************************************************** Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/