[TechAssist] Re: Need part for loading arm on Philips CCA092AT02
- From: "William Rayburn" <premtech@xxxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Tue, 31 Aug 2004 21:50:01 -0700
Carl,
I don't have the part number for you but a good ready source you might want to
put in your
book for VCR and VCR combos like that where you need the VCR part.
Frank Fendley
http://www.iglou.com/studiosound/
or email Frank directly at:
Frank@xxxxxxxxx
Hope this helps.
Bill
William H. Rayburn, CET
NESDA Member
Premium Technologies
PO Box 442
Long Beach, Wa. 98631
(360) 642-4993
----- Original Message -----
From: "CARL HURT" <churt-savannah@xxxxxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Tuesday, August 31, 2004 9:17 PM
Subject: [TechAssist] Need part for loading arm on Philips CCA092AT02
Does anyone have parts list for Philips CCA092WAT02
I need part # for right loading arm. This is arm that pulls tape out of
casette and wraps around head.
I need the loading arm between head and audio/clt head.
Carl Hurt Electronics
3513 Budreau Av.
Savannah, Georgia
1-912-964-2275
churt-savannah@xxxxxxxxxxxxxxxx
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
