Don't know that set, but I would look at the cathode and grid and screen voltages on the crt's. Could be as simple as the source of screen or cathode voltage,similar to Sonly's ikv loss. al ----- Original Message ----- From: "Bil Green" <tv.vcrrepair@xxxxxxxxxxx> To: ".Techassist" <techassist@xxxxxxxxxxxxx> Sent: Thursday, May 30, 2002 5:59 AM Subject: [TechAssist] Need Schematic or Help - PHILPS 53TP60 (PTV) > > Philips PTV > Model 53TP60 > Chassis PTV630-AH01 > > I would really appreciate getting the schematic for the Deflection and power > boards. The original problem was very bad convergence. > > Now there is high voltage and sound, but the screen is black (CRT filaments > are lit). No voltage at the vertical output IC. I have measured 13VDC, > 250VDC > and around 500VDC in the area of the deflection circuit. > > Seems like a shutdown circuit is causing this > > Bil > > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.tech-assist.org/change.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ > > ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.tech-assist.org/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/