[TechAssist] NEC VCR DS8000U Need gear on bottom of VCR
- From: John Mielke <maintv2002@xxxxxxxxxxxxx>
- To: Tech assist <techassist@xxxxxxxxxxxxx>
- Date: Fri, 20 Sep 2002 11:08:14 -0600
I'm working on NEC DS8000U VCR, a rather special VCR but is same
mechanism as models N901 thru N966. I need the white plastic gear on
the bottom about 1 1/2 inches diameter that drives the metal rings that
load the tape on the heads. No, this is not a Beta but loads the same
way. I would like to purchase one, new or used in usable condition or
would appreciate a part number if someone has a service manual.
--
John Mielke
Main TV
Longmont,Co
303 776 6955
maintv2002@xxxxxxxxxxxxx
------------------------------------------
To REMOVE your email address, click here:
http://www.tech-assist.org/unsubb.html
To CHANGE your email address, click here:
http://www.techassist.net/forms/change.html
------------------------------------------
***NEW*** Tips Added Instantly!!!***
Submit Repair Tips here:
http://www.tech-assist.org/secure/tip/
Other related posts:
