[TechAssist] Re: Mitsubishi CK2694c does work with good remote unless a foot away or less
- From: Al Gutz <alg@xxxxxxxxxxx>
- To: techassist@xxxxxxxxxxxxx
- Date: Wed, 11 Sep 2002 22:48:07 -0400
Ray
Don't recognize the exact set from the mits model, would know if I had
electrohome model. On the model that has the remote sensor mounted on a
seperate pc board with an IC, change all the caps on this board.
Al G
ray clarke wrote:
>
> Chassis SA1-c94r. will not work with a good remote
> unless right next to tv. any ideas
> Ray Clarke
> Billette TV Howick, Que
>
> __________________________________________________
> Yahoo! - We Remember
> 9-11: A tribute to the more than 3,000 lives lost
> http://dir.remember.yahoo.com/tribute
> ------------------------------------------
> To REMOVE your email address, click here:
> http://www.tech-assist.org/unsubb.html
> To CHANGE your email address, click here:
> http://www.techassist.net/forms/change.html
> ------------------------------------------
> ***NEW*** Tips Added Instantly!!!***
> Submit Repair Tips here:
> http://www.tech-assist.org/secure/tip/
------------------------------------------
To REMOVE your email address, click here:
http://www.tech-assist.org/unsubb.html
To CHANGE your email address, click here:
http://www.techassist.net/forms/change.html
------------------------------------------
***NEW*** Tips Added Instantly!!!***
Submit Repair Tips here:
http://www.tech-assist.org/secure/tip/
Other related posts:
