This set had a bad picture when cold. I heated the main chassis around IC2P02 9v regulator and the picture cleared. Cooling the circuit made it bad again. Replaced IC2P02 and the surrounding E-caps and set is running good. IC2P02 was running very hot before being changed I think C2P05 100mf at 16V was the culprit. Thanks to all who helped. Al Marquardt ampm@xxxxxxx Al Marquardt Electronic Repair 206 W Main Girardville Pa. 17935 ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/